Interlocking Shelf/Console

Published: January 30, 2023

description

A TV Shelf/Console type design. Cut on the X-Carve Pro out 1 4x8 Cherry Plywood sheet.

license

Attribution 3.0 Unported (CC BY 3.0)
4
22
0
15
INSTRUCTIONS

1. Materials

I used a straight 1/8" bit and 3/4" plywood. The slots are designed to fit .70" thick material.

After cutting, I sanded off the tabs and edges. Assembled before painting to ensure fit.

Used primer for painting but still needed a couple coats. I used test sample paint jars to save $ on paint.

After painting, the fit was snug so you may need to sand the slotted edges.