to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
Noncommercial — You may not use this work for commercial purposes.
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
** The author's moral rights;
** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Chris - Thanks for the kind words, all of my projects are public, if you could, please try to open them in a different internet browser and reply back if that works, have a good one. Drew
Andrew Minter · July 30, 2018
Tried 3 different browsers : Firefox/Chrome/Microsoft Edge. will not open in any ??
Lawrence Kelley · August 17, 2018
I’m sorry for the difficulty with some of my projects, I’ve contacted Inventables yesterday about the issue and hopefully they’ll be getting back to me soon. I’ve checked and rechecked everything to do with it, now I’m just waiting on a response, check back soon!
Andrew Minter · August 17, 2018
Looks like they got it fixed, was able to download, thank you very much
Lawrence Kelley · September 01, 2018
This is awesome. I copied to try and cut. Question, and it could be me, but when I count the stripes it seems as if there are more than 13. Is it cause it has a border? I was gona paint the wood first then carve. Will send you a pic if you want. Thanx again.
Zabdiel Cruz · May 22, 2019
@Zabdiel Cruz, thanks for the kind words, yes the number of strips total at 13, the border around the flag gives the illusion of two extra stripes. I also have a full American flag that I plan on posting soon as well if you’re interested, I made a few in fact but the last one has all 50 stars.
Andrew Minter · May 22, 2019
There’s a couple of others as well that have fewer stars so the size of the flag could be kept more compact and it also helps keeps the cut time down. I will upload these variants as soon as I can. I design this flag for my cousin who’s in the Army, he’s an SSG and I’m very proud of him. It was also
Andrew Minter · May 22, 2019
My way to show my appreciation to all of those who serve. Again I appreciate your words and I eagerly look forward to you take on it! Enjoy and cheers!
Andrew Minter · May 22, 2019
Andrew thank you for being able to share this project. When I open it in easel, there is another flag to the left of the work space. I deleted it, but when you highlight the entire project, it still shows the area to the left is highlighted
Nick Tratta · March 03, 2020
Sorry for the late response, not sure what you mean, maybe there’s a pice if the other flag there that was missed? The only suggestion I can make without seeing what you mean is to highlight what you want, copy it, delete everything and paste what you copied back to your work space, hope that helps!
Andrew Minter · April 02, 2020
How should it be colored? I know OD green and white, but what order?
Joshua Kennedy · July 11, 2020
@Joshua Kennedy, any colors in any combination you want! If you do make this and color it, please share your version in the section where it asks if you’ve made one so all can see it! hope you enjoy the file!
Can it be shared ... this is awesome
Chris Koufodontis · July 30, 2018
Chris - Thanks for the kind words, all of my projects are public, if you could, please try to open them in a different internet browser and reply back if that works, have a good one. Drew
Andrew Minter · July 30, 2018
Tried 3 different browsers : Firefox/Chrome/Microsoft Edge. will not open in any ??
Lawrence Kelley · August 17, 2018
I’m sorry for the difficulty with some of my projects, I’ve contacted Inventables yesterday about the issue and hopefully they’ll be getting back to me soon. I’ve checked and rechecked everything to do with it, now I’m just waiting on a response, check back soon!
Andrew Minter · August 17, 2018
Looks like they got it fixed, was able to download, thank you very much
Lawrence Kelley · September 01, 2018
This is awesome. I copied to try and cut. Question, and it could be me, but when I count the stripes it seems as if there are more than 13. Is it cause it has a border? I was gona paint the wood first then carve. Will send you a pic if you want. Thanx again.
Zabdiel Cruz · May 22, 2019
@Zabdiel Cruz, thanks for the kind words, yes the number of strips total at 13, the border around the flag gives the illusion of two extra stripes. I also have a full American flag that I plan on posting soon as well if you’re interested, I made a few in fact but the last one has all 50 stars.
Andrew Minter · May 22, 2019
There’s a couple of others as well that have fewer stars so the size of the flag could be kept more compact and it also helps keeps the cut time down. I will upload these variants as soon as I can. I design this flag for my cousin who’s in the Army, he’s an SSG and I’m very proud of him. It was also
Andrew Minter · May 22, 2019
My way to show my appreciation to all of those who serve. Again I appreciate your words and I eagerly look forward to you take on it! Enjoy and cheers!
Andrew Minter · May 22, 2019
Andrew thank you for being able to share this project. When I open it in easel, there is another flag to the left of the work space. I deleted it, but when you highlight the entire project, it still shows the area to the left is highlighted
Nick Tratta · March 03, 2020
Sorry for the late response, not sure what you mean, maybe there’s a pice if the other flag there that was missed? The only suggestion I can make without seeing what you mean is to highlight what you want, copy it, delete everything and paste what you copied back to your work space, hope that helps!
Andrew Minter · April 02, 2020
How should it be colored? I know OD green and white, but what order?
Joshua Kennedy · July 11, 2020
@Joshua Kennedy, any colors in any combination you want! If you do make this and color it, please share your version in the section where it asks if you’ve made one so all can see it! hope you enjoy the file!
Andrew Minter · July 12, 2020
Was this carved on the x carve or carvey
Luke Racke · January 08, 2021
This was carved on the xcarve
Andrew Minter · May 05, 2022