Single Cutaway Electric Guitar

The cutting operations have been planned to minimize bit changes. The specified bits must be used. When g-code files have been imported, be sure to read the notes for those specific carving operations so you'll know what bit to use. The feeds and speeds for the imported g-code cannot be changed. All of the material dimensions should not be changed. The following is a list of the parts and materials needed. Items with a part number can be purchased from stewmac.com. Body blank: 2-piece Mahogany Item 14” x 18” x 1.75” Neck blank: Maple Item 5” x 30” x 1” Fretboard blank: East Indian Rosewood Item 4” x 24” x .25” Hot Rod Low-profile 2-WayTruss Rod: Item #2652. Tuning machines: StewMac 6 inline chrome Item #100876. String trees: Gotoh chrome Item #0171. Fret wire: medium/higher 12” radius 24 pieces Item #0152-PC-12. Nut blank: 1.75” x .25” x .375”. Humbucker: Neck Item #101548 Bridge Item #101550. Bridge: StewMac Golden Age top-loading hardtail bridge Item #5303. Volume and tone pots (one for each): 500k-ohm Item #0130. Capacitor: For humbuckers: Orange Drop .047uF Item #1282. Knobs: Black top hat bell knobs: Item #1194-B. Selector switch: For two humbuckers: Switchcraft short chrome Item #1242. Jack: Switchcraft mono Item #4652. Strap buttons: Gotoh chrome Item #0170