Cribbage Board and parts

The way I did it was to carve the board details and outlines parts, used black epoxy to fill (make sure to seal your board first or the epoxy will migrate in the grain). Let it dry well sand off the excess epoxy and sealer and drill the peg runners. Finally flip it over and carve the peg storage. Alignment is critical because you are messing with the board so make sure you can get it back exactly for the drilling the peg runners. I messed up two blanks before I figured out to create an "L" on my machine that I tucked the board into the corner of. I started with some cutting boards I found at Ikea on sale that I ran through the table saw to cut to size and through the router to round over the edges.