to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
Noncommercial — You may not use this work for commercial purposes.
Share Alike — If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
** The author's moral rights;
** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Rich,
Thank you for sharing this design! Do you think it has to be birch plywood? I have MDF on hand - do you think that would work? I plan on using this as an end table. Also, about how long did it take you to cut everything for this?
Mdf is to weak for all these joints. Also the entire plan is on here free so no need to buy it. Just a thanks and a picture of your stool would be awesome. Thanks all.
COMMENTS
I dont see the round cut offs in the file.
Michael Petisco · September 08, 2019
There are four or five different pages. You need to look on the other pages at the bottom of easel.
Eggchef · September 08, 2019
Rich, Thank you for sharing this design! Do you think it has to be birch plywood? I have MDF on hand - do you think that would work? I plan on using this as an end table. Also, about how long did it take you to cut everything for this?
Shannon Humphryes · June 05, 2020
Rich awesome Work... im also wondering about MDF whats your thoughts
Mike Goodrum · June 08, 2020
Mdf is to weak for all these joints. Also the entire plan is on here free so no need to buy it. Just a thanks and a picture of your stool would be awesome. Thanks all.
Eggchef · June 08, 2020
Mr Rich once you’ve put it all together, what’s the overall height of the stool?
Daniel Nathan Gallup · June 12, 2020
The height is the same as the uprights.
Eggchef · June 12, 2020
23 inches tall.
Eggchef · June 19, 2020
love the design. thank you Is it 1/2 in ply
Stephen Robinson · July 17, 2021
Cut all the pages in the file and you will have just enough. Look at the bottom of easel for more cut pages. Rich
Eggchef · September 07, 2021
I'm quite new here and saw this on Facebook. Is there a way to download the file? I have looked here, but don't see it. Thank you.
Grant Wilkinson · April 19, 2024