A custom tool and bit holder that I made for my spouse.
Dimensions of the MDF: 24 x 14 in, Thickness 3/4 in.
Bits:
1/4 in for rough pass.
1/8 in for detail pass
Carving time took roughly 3.5 hours
25
349
4
164
COMMENTS
I like what you did here! I am guessing the empty spot between the calipers and wrench is for the precision nut, but what are the ~1 in circles under that for? Thanks for sharing
COMMENTS
I like what you did here! I am guessing the empty spot between the calipers and wrench is for the precision nut, but what are the ~1 in circles under that for? Thanks for sharing
Andrew Harris · July 25, 2019
Hi Andrew, the “4” circles under the wrenches are for different size precision nuts.
David Sease · July 25, 2019
Oh thanks for the info! I copied your design and am planning on using it. Thanks for sharing it David
Andrew Harris · July 25, 2019
GREAT CUT OUT, DOES ANYONE BY CHANCE HAVE A DESIGN THAT HAS THE PROPER SIZE WRENCH FOR THE MIKITTA
Robert s pember · March 10, 2022