#Resist - 3.5" wide
Project by
Liam Ferris
Published On
February 10, 2017
General Information
A very basic carve created from the MoveOn.org #RESIST logo. I carved this onto a 4" pine hobby board using a 1/16" Inventables upcut bit. I cut the pine board down to 11.5" lengths, stained them with a vinegar aging solution, then coated the boards with semi-gloss polyurethane spray before carving.
Open in Easel®
#MakeAmericaGreatAgain
Andrew Minter · April 05, 2018