Contrast House Model Kit
Project by
Michael Curry
Published On
November 24, 2015
General Information
The Contrast House is a flat cut model kit that can be made using with your X-Carve. There are 8 sheets of parts that need to be cut. The other seven sheets are available in the linked Projects.
Open in Easel®
Instructions
The Contrast House is an adaptation of the Berea Contrast House available for free from makeCNC.com. These files have been adapted and optimized for carving on the X-Carve.
This kit has been re-designed to be carve from 1/8th inch or 3mm material. It needs to be carved with a 1/8th inch or 3mm mill bit.
To get the assembly instructions, order for a free set of Berea Contrast House plans at "MakeCNC":http://www.makecnc.com/berea-contrast-house.php
Plans and assembly instructions are delivered digitally after completing check out.
The other seven easel projects are available by following these links:
"Exterior Walls B":http://easel.inventables.com/projects/P48zQhEM6hS-WEzGFIdGmA
"Interior Walls A":http://easel.inventables.com/projects/AXJyn8M-BH4sswOhWUvTqA "Interior Walls B":http://easel.inventables.com/projects/tBX1AfG-7YdhqQsBgEzxKQ
"Roof A":http://easel.inventables.com/projects/O-Ik7jIUMQeghhi5KyFApQ "Roof B":http://easel.inventables.com/projects/KGSLHncsthJJbLHrT6g7zQ
"Floor A":http://easel.inventables.com/projects/bM0XnXUXX5qJk-et4GTzYQ "Floor B":http://easel.inventables.com/projects/6nMN2g1wS484pe-R86Yavg
thank you for your time donating this project to everyone! i greatly appreciate it!!
Casey kookla · June 22, 2017
can someone please check out these files and tell me if the cut depths are backwards? I tried this and it seems its cutting wrong. all I loaded file, deleted all but 1 part for a test, and it cut the outline only part way through, and the shallow detail parts cut out all the way through!
Casey kookla · June 25, 2017