Strat Hardtail Body and Neck options

Published Aug 23, 2026 · In Progress

Description

Stratocaster Type Neck with Spokewheel Type Truss Rod. I always work from a centreline so although this shows 1/2 a neck my start point is from the centre bottom of the work piece

0 Favorites

0 Views

0 Comments

1 Copies

Specs

Machine: other
Material: Soft Maple, MDF

Notes

Truss Rod Measurements do vary so please check and adjust to suit yours. Also this neck is designed with a slightly narrower nut width I like 41.5mm. So this is cut to 41.9mm to finish at that measurement (41.5)