Custom Anniversary Picture Frame
Project by
Antonio Hernandez Menchaca
General Information
It's okay, I know what you're thinking... that's one cheesy picture frame, but isn't that what being in a relationship is about?
Project License
Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0)
Open in Easel®
Glueing boards
Grab both of your 3/4 inch walnut boards and glue them together to make a 12 x 12 inch board. Clamp them up and wait til the glue dries enough so that the pieces won't separate during the carving.
Estimated time: 5 minutes
Carving
I have never owned or even used a CNC router, so I will just asume how this step would take place. Place the board on your CNC router and make sure to center it correctly. Once everything is setup run the Easel file in order to create the piece.
Estimated time: 29 minutes
Sanding
Grab your 150 grit sandpaper and sand out the piece to leave it smooth.
Estimated time: 5 minutes
Finish
Once the workpiece is sanded out, choose your finish of choice.
Estimated time: 10 minutes
Letter Assembly
Finally everything i s finished and ready for the final step, the assembly. Grab your drill and your 3 screws, use the pre-routed pilot holes in order to fix the letters to the base.
Estimated time: 10 minutes
Share and Enjoy
Since I do not own a CNC machine, I can't really make these projects using that process, so if you do choose to remake my projects please share the pictures of it.
Enjoy!
Estimated time: 5 minutes