Carved
Halloween Jack-0-lantern
Favorites
Views
Comments
Copies
Description
Halloween Jack-0-lantern
Copied a previously displayed Halloween Jack-0-lantern and posting the Easel File for others to make the project.
Mine is sized for 20x20 sheet of 1/4 inch birch plywood.
Remakes
Specs
- Machine
x-carve 2016
- Material
Birch Plywood
Tags
License
Attribution 3.0 Unported (CC BY 3.0)Attribution 3.0 Unported (CC BY 3.0)
You are free:
- to Share — to copy, distribute and transmit the work
- to Remix — to adapt the work
- to make commercial use of the work
Under the following conditions:
- Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
With the understanding that:
- Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
- Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
- Other Rights — In no way are any of the following rights affected by the license: ** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations; ** The author's moral rights; ** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Comments
Can you make this public?
Alex Ouellet · July 28, 2018
Cool. If this were public it would even be better.
Dusty `Rhoades · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
Can you make this public it is cool
Andrew walsh · October 11, 2018
easel.inventables.com/projects/uw_rzL4DwLjyMw0upJ… Not sure it shows public on my end
John HolinkaPro · October 11, 2018
Seriously, didn't you see that the fittings are not right? I made the pieces and nothing matches. Well done on the work.
cris · September 13, 2025
Log in to post a comment to the designer