We use cookies to personalize content, interact with our analytics companies, advertising networks and cooperatives, and demographic companies, provide social media features, and to analyze our traffic. Our social media, advertising and analytics partners may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. Learn more.
to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
Noncommercial — You may not use this work for commercial purposes.
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
** The author's moral rights;
** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
@Michael Ailey - The cut time can range anywhere between 4-6 hours or so depending on your feeds and speeds settings, and I normally cut plywood for the mass majority of my projects which I use a downcut bit on, you get nice crispy clean lines with those bits on that material.
Also, this project was designed as a pretty big piece, You can modify its size slightly without losing any details to make it smaller which will also reduce cut time as well. Hope this helps. If you open the project you should get an estimated time in how long it’ll take to cut on the lower right.
Thanks, Andrew. BTW, is there anyway to "invert" it? I'd like to have my stars carved in instead of raised up which would also require the stripes to be inverted from what they are.
@Michael Aikey- All you have to do is select all of the stars and change the cut depth to what you want, then change the cut depths of the other portions you want in the background the same way. If the rendering doesn’t look right, select what looks wrong and under edit send it to back.
@Michael Aikey- Give that a try and if you have any trouble with it or need anymore help with anything else let me know with another comment and I’ll see what I can do, cheers. Allso post pictures after your cut so we can all see how it turned out, I have yet to cut one myself, haven’t had time!
Comments
How long was the carve and what bit did you use?
Michael AikeyPro · July 25, 2019
@Michael Ailey - The cut time can range anywhere between 4-6 hours or so depending on your feeds and speeds settings, and I normally cut plywood for the mass majority of my projects which I use a downcut bit on, you get nice crispy clean lines with those bits on that material.
Drew · July 25, 2019
Also, this project was designed as a pretty big piece, You can modify its size slightly without losing any details to make it smaller which will also reduce cut time as well. Hope this helps. If you open the project you should get an estimated time in how long it’ll take to cut on the lower right.
Drew · July 25, 2019
Thanks, Andrew. BTW, is there anyway to "invert" it? I'd like to have my stars carved in instead of raised up which would also require the stripes to be inverted from what they are.
Michael AikeyPro · September 08, 2019
@Michael Aikey- All you have to do is select all of the stars and change the cut depth to what you want, then change the cut depths of the other portions you want in the background the same way. If the rendering doesn’t look right, select what looks wrong and under edit send it to back.
Drew · September 08, 2019
@Michael Aikey- Give that a try and if you have any trouble with it or need anymore help with anything else let me know with another comment and I’ll see what I can do, cheers. Allso post pictures after your cut so we can all see how it turned out, I have yet to cut one myself, haven’t had time!
Drew · September 08, 2019