Cocktail Smoker w/Lid

notes

Original design credit goes to Russell Smith. I have made several modifications. Use these screens for perfect fit https://www.amazon.com/dp/B01CC3VS08?ref=ppxyo2ovdtbfedasintitle

Can leave the LOGO on the main workpiece as it will not carve with 1/4" bit. If you add a detail bit to same workpiece as at the 1/4 bit, the detail run will ruin the piece as it will cut the outline and the other objects as well.

Carve the LOGOs on new workpiece ONE AT A TIME unless you have set your machine height greater than 7mm higher than default. You will need to reset the Z axis at the logo position on the smoker, not the stock. If you cut multiple smokers with logos and the safety height is not high enough, the bit will drag through the uncut top of wood.
Stephan TWS thewoodsurgeon.com

machine

X-Carve

materials

Hard Maple