drawer 16.25 x 20.75 x 4.25, 12mm
Project by
Published On
December 04, 2025
General Information
CNC-cut drawer or tote sized 16.25" × 20.75" × 4.25". Cuts all five parts from one 24"×48" sheet of 12mm Sande ply. Snug finger-joint construction—no sanding, nails, or mallet needed. Glue, clamp, and finish. See README workpiece for full instructions.
Materials:
Birch Plywood
Machine Type:
Shapeoko XXL Pro
Notes:
Designed so four drawers can be cut from a single 24"×48" sheet of 12mm plywood. Finger joints are generated by Easel’s Box Maker and assemble with glue and clamps only—no mallet or nails required. See the README workpiece for full instructions, assembly steps, and finishing recommendations.
More CNC shop storage designs are available at: https://www.etsy.com/shop/TahoeCNCDesigns
Preview in Easel
Log in to post a comment to the designer